- Time of issue:2019-11-19 00:00:00
1. The machine must be installed on a level ground that can reliably bear the weight of the machine itself. When conditions permit, it is best to place a steel plate larger than the size of the base of the machine on the bottom of the machine to ensure uniform ground stress.
2.800 tons and above of the machine need to pre-dig the pit, the pit should be according to the relevant model pit drawings construction, pit construction completed 20 days before the installation of the machine, to ensure that the concrete is fully mature.
3. New authentic brand no.68 anti-wear hydraulic oil should be used for hydraulic oil. Oil loading should be more than 2/3 of the oil standard window. If the use of heavily oxidized, dirty or mixed oil products, will seriously shorten the use of life products, and may even directly damage the machine. In order to ensure the quality of the machine, we intend to use the special hydraulic oil for the cold extruder.
4. In the absence of special requirements, the power supply of the machine is three-phase 380V. The steering direction of the motor is clockwise (see shaft end).
5. The machine must be reliably grounded.
6. Must be connected to cooling water as required, to ensure that the hydraulic system of temperature control within 45 ︒ C.
7. In normal operation, safety grating must be used to prevent the occurrence of safety accidents.
Scan the QR code to read on your phone